Sunday, November 6, 2011

Attacking paint imperfections on a wingtip

Sometimes I am bored... today I attacked every minor speck on the right wingtip.  Pretty much as perfect as it will get after I finished.  First you have to find the speck, then cut it down with some 2000 grit paper, the clean and use diminishing compound to bring back the finish.  As the compound breaks down it needs to be wetted to continue the process to end up with a shine that matches the untouched areas.  It is pretty amazing but you need to be cautious of cutting into the underlying color or primer.  As I have done this more and more I have become somewhat skilled in evaluating a speck before trying to improve the finish... most times I have been getting it right and the finish has been getting better and better; mostly to the right side of the plane though since it is nearer to my lights and the bulk of my work area.

I enjoy fussing with the finish.

diminishing compound on paint imperfections ready to buff back to a shine

Saturday, November 5, 2011

290.6 tach hours - Oil Change

290.6 Tach hours

These oil changes are getting pretty easy now.  Very little mess.  Cut filter open and inspected media - no debris or metal found.

the cleanest  change yet ;)

Saturday, October 29, 2011

Trailing edge of upper gear leg fairings

When I initially fabricated the upper intersection fairings they were pretty close fitting but after paint they were splayed out a bit on the trailing edge.  I ignored them but it has been an issue that has been simmering thoughts of doing something... since then I have been noticing how other similar aircraft address this and found that they were attached with a screw and nut on a local extra 300.  

Today I was noticing a bit of a squeaky chaffing sound during taxi and chased it down to the gear fairing on the right side where the inside tab has broken allowing quite a bit of movement.  I decided to fix the pieces at the intersection by adding an attachment on the trailing edge. this really cleans things up and i should have done this earlier...

added a screw to join the trailing edge of the upper gear leg fairing with the gear leg fairing 
I might end up painting these screw heads